Mono class D PA power amplifier,with energy-saving effect.
1 x 500 W
Class D concept with a high efficiency of more than 90% to reduce energy costs
Additional integrated energy-saving functions, e.g. device automatically goes to standby mode when no input signal is present (as soon as an input signal is detected, the amplifier is automatically switched on again)
Requires a significantly lower rechargeable battery capacity for emergency power operation than 100 V analogue amplifiers
Clearly reduced cooling requirements due to low heat dispersion
Special protective circuits prevent damage caused by short circuit or overheating
Switchable 200 Hz high-pass filter, 6 dB/oct.
Additional priority input
Mains operation or 24 V emergency power operation
Power rating at 2 Ω
Power rating at 4 Ω
Power rating at 8 Ω
Power rating at 100 V
1 x 500 W
Power rating with 4 Ω bridged operation
Power rating with 8 Ω bridged operation
Peak music power output (PMAX)
100 V/20 Ω
775 mV/30 kΩ, bal.
high-pass filter: 200 Hz, 6 dB/oct.
> 100 dBA
˜ 230 V/50 Hz/1,015 VA, 4 W (standby mode), DC current 24 V/35.5 A, 480 mA (standby mode)